This job is a direct transript from Weatherford's website www.weatherford.com
To apply online click
http://jobs.weatherford.com/jobs/5661673-ct-coordinator
Weatherford International
Careers
CT COORDINATOR
< Back To Job Listing
Location: MUSCAT, MCT, Oman
Job Family: Operations management
Updated At: 2016-08-09
Apply for this Job
JOB DESCRIPTION
COILED TUBING GLOBAL TECHNICAL STANDARD
DOCUMENT NUMBER:
WFT231766
REV:
0
PAGE:
18
ORIGINAL ISSUE DATE:
3.2. Approval Authority for Exceptions
The results of the risk assessment per Section 2.4 of these standards shall determine the approval
authority for an exception to these requirements according to the following criteria.
1. Deviations from Weatherford’s CT SOP shall have at least risk level = low.
2. Deviations from specific requirements for HPS, EPS, SS, and RCS operations shall have at
least risk level = medium.
The approval authority corresponding to each risk level is:
1. Low = CT Operations Supervisor
2. Medium = CT Services Coordinator
3. High = Operations Manager
4. WEATHERFORD CT PERSONNEL
This section defines minimum requirements for selected Weatherford CT service personnel.
4.1. Qualifications Definitions
1. For the purposes of this section, “competency” shall mean:
a. The ability to apply knowledge to routine assignments with little supervision
b. Understanding of key technologies, procedures, and practices
2. For the purposes of this section, “proficiency” shall mean:
a. The ability to apply knowledge to non-routine applications and problems
b. Understanding of fundamental principles, underlying technologies, procedures, and
practices
3. For the purposes of this section, “fluent in English” shall mean:
a. The ability to speak, read, and write English
b. Understanding of English technical words, equipment names, terms, and phrases
specific to CT operations
4. For the purposes of this section, “Basic Safety Certification” means certification of
satisfactory completion of training for all of the following subjects.
a. Job Safety Analysis (JSA)
b. Risk Assessment
c. Basic first aid
d. Working at Heights
e. Confined Space Entry
f. Working with Pressure
g. Operation of dry chemical fire extinguishers
5. For the purposes of this section, “Specific Safety Certification” means certification of
satisfactory completion of training for the following subjects, as appropriate to the job
assignment.
a. Sea Survival
COILED TUBING GLOBAL TECHNICAL STANDARD
DOCUMENT NUMBER:
WFT231766
REV:
0
PAGE:
19
b. Helicopter Underwater Egress Training (HUET)
c. Tropical HUET
d. Arctic Survival
e. Desert Survival
4.2. CT Services Coordinator
A CT Services Coordinator shall meet the requirements in this section.
4.2.1. Responsibilities
The responsibilities of a CT Services Coordinator shall include:
1. Meeting with the customer personnel as required to discuss current operations and
planning for future operations
2. Preparation of Weatherford’s Job Program
3. Assisting the customer personnel as required to incorporate Weatherford’s Job Program
into the customer Job Program
4. Maintaining a current copy of the contract with the customer and ensuring that Weatherford
complies with all requirements of the contract
5. Ensuring all Weatherford’s equipment, containers, and slings have current certification
required by the customer and regulatory authorities
6. Ensuring all Weatherford’s equipment and services applied to the job meet both regulatory
and the customer SH&E requirements
7. Ensuring all Weatherford’s equipment and services applied to the job comply with these
standards
8. Testing and inspecting equipment and/or materials
9. Monitoring daily activities performed by all Weatherford personnel assigned to the job
10. Verifying all required data submittals to the customer are being provided
11. Assisting Weatherford’s Quality Representative in handling Quality Assurance/Quality
Control issues, including responding to and resolving any non-conformance report (NCR)
generated by the customer
12. Reporting continuous improvement efforts and key performance indicators (KPI)
13. Preparation of Post-Job Reports
14. Providing invoices and resolving invoice issues
15. Keeping abreast of the customer schedules and operations associated with planned or
ongoing CT jobs
16. Maintaining an effective communications interface with the customer and other contractors
to ensure timely progress and effective performance
17. Preparation of RFE (as required)
4.2.2. Qualifications
A CT Services Coordinator shall meet the following qualifications.
1. Basic Safety Certification
COILED TUBING GLOBAL TECHNICAL STANDARD
DOCUMENT NUMBER:
WFT231766
REV:
0
PAGE:
20
ORIGINAL ISSUE DATE:
2. Proficiency with Weatherford’s quality management system (QMS)
3. Proficiency with CT job planning
4. Competency with computer-aided job design and evaluation
5. Three (3) years of experience with Weatherford
6. Fluent in English
4.3. Technical Support Personnel
Technical Support Personnel shall meet the requirements in this section.
4.3.1. Responsibilities
The responsibilities of Technical Support Personnel shall include the following.
1. CT string design and job planning
2. Preparation of Weatherford’s Job Program
3. Participation in risk assessments
4. Qualification of Weatherford’s riser and lubricator sections (as required)
5. Equipment failure investigation and analyses
6. Preparation of Post-Job Reports
4.3.2. Qualifications
Technical Personnel shall meet the following qualifications.
1. Basic Safety Certification
2. Proficiency with Weatherford’s quality plan (QP) and CT SOP
3. Proficiency with Weatherford’s equipment, tools, and services applied to the job
4. Proficiency with CT string design and job planning
5. Proficiency with computer-aided job design and evaluation
4.4. CT Operations Supervisor
A CT Operations Supervisor shall meet the requirements in this section.
4.4.1. Responsibilities
The responsibilities of a CT Operations Supervisor shall include the following.
1. Supervising all Weatherford activities at the job site
2. Maintaining an effective communications interface with the customer and other contractors
at the job site
3. Ensuring Weatherford’s equipment, services, and activities at the job site comply with these
standards, regulatory requirements, and the customer Job Program
4. Monitoring daily activities performed by Weatherford personnel at the job site
5. Providing all required job data submittals to the customer
COILED TUBING GLOBAL TECHNICAL STANDARD
DOCUMENT NUMBER:
WFT231766
REV:
0
PAGE:
21
ORIGINAL ISSUE DATE:
Sept-1-2012
REVISION DATE:
TITLE: GLOBAL TECHNICAL STANDARDS
© 2013 Weatherford International, Inc.
This document is copyrighted and, whether patentable or non-patentable subject matter, embodies the proprietary and confidential information of
Weatherford. Recipients agree it is loaned in confidence with the understanding that neither it nor the information in it will be reproduced, used or disclosed
in whole or in part for any purpose except the limited purpose for which it is loaned. This document shall be returned to Weatherford upon demand.
6. Maintaining a current copy of these standards, Weatherford’s CT SOP, and relevant
manuals at the job site
7. Conducting JSA
8. Participation in risk assessments
4.4.2. Qualifications
A CT Operations Supervisor shall meet the following qualifications.
1. Basic Safety Certification
2. Specific Safety Certification
3. Proficiency with Weatherford’s QP and CT SOP
4. Proficiency with operating Weatherford’s CT equipment at the job location
5. Competency with routine maintenance and minor repair of Weatherford’s CT equipment
6. Competency with all aspects of the computer simulations
7. Competency with operating the DAS
8. Certified in well control for workover operations by a source accredited by the International
Association of Drilling Contractors (IADC) or acceptable to Weatherford
9. Certified in advanced first aid and CPR by a source acceptable to Weatherford
10. Certified to operate a self-contained breathing apparatus (SCBA) by a source acceptable to
Weatherford
11. Certified for sour service operations by a source acceptable to Weatherford
12. Two (2) years of experience with Weatherford
13. Fluent in English
4.5. Equipment Operator
An Equipment Operator shall meet the requirements in this section.
4.5.1. Responsibilities
The responsibilities of an Equipment Operator shall include the following.
1. Operate Weatherford’s CT equipment at the job site
2. Routine maintenance and minor repair of Weatherford’s CT equipment
4.5.2. Qualifications
An Equipment Operator shall meet the following qualifications.
1. Basic Safety Certification
2. Specific Safety Certification
3. Competency with Weatherford’s QP
4. Proficiency with Weatherford’s CT SOP
5. Proficiency with operating Weatherford’s CT equipment at the job location
6. Competency with routine maintenance and minor repair of Weatherford’s CT equipment
7. Competency with operating the DAS
COILED TUBING GLOBAL TECHNICAL STANDARD
DOCUMENT NUMBER:
WFT231766
REV:
0
PAGE:
22
ORIGINAL ISSUE DATE:
Sept-1-2012
REVISION DATE:
TITLE: GLOBAL TECHNICAL STANDARDS
© 2013 Weatherford International, Inc.
This document is copyrighted and, whether patentable or non-patentable subject matter, embodies the proprietary and confidential information of
Weatherford. Recipients agree it is loaned in confidence with the understanding that neither it nor the information in it will be reproduced, used or disclosed
in whole or in part for any purpose except the limited purpose for which it is loaned. This document shall be returned to Weatherford upon demand.
8. Certified in well control for workover operations by a source accredited by the IADC or
acceptable to Weatherford
9. Certified to operate a SCBA by a source acceptable to Weatherford
10. Certified for sour service operations by a source acceptable to Weatherford
4.6. Maintenance Personnel
Maintenance Personnel shall meet the requirements in this section.
4.6.1. Responsibilities
The responsibilities of the Maintenance Personnel shall include the following.
1. Maintenance of Weatherford’s CT equipment
2. Repair of Weatherford’s CT equipment
3. Assist Equipment Operators and CT Operations Supervisors to diagnose and repair
problems with CT equipment
4.6.2. Qualifications
Maintenance Personnel shall meet the following qualifications.
1. Basic Safety Certification
2. Proficiency with Weatherford’s QMS
3. Proficiency with Weatherford’s preventative maintenance program (PMP)
4. Proficiency with maintaining and repairing Weatherford’s CT equipment
5. Competency with operating Weatherford’s CT equipment
4.7. Quality Representative
A Quality Representative shall meet the requirements in this section.
4.7.1. Responsibilities
The responsibilities of a Quality Representative shall include the following.
1. Development and satisfactory implementation of Weatherford’s local QP and CT SOP as
required by the customer
2. Handling any NCR generated by the customer against Weatherford’s service operations
(including equipment failures).
3. Provision of Weatherford’s corrective action response(s) and preventative action
response(s) as directed by the customer
4. Actions to ensure all required corrective and preventive actions are fully implemented
4.7.2. Qualifications
A Quality Representative shall meet the following qualifications.
COILED TUBING GLOBAL TECHNICAL STANDARD
DOCUMENT NUMBER:
WFT231766
REV:
0
PAGE:
23
ORIGINAL ISSUE DATE:
Sept-1-2012
REVISION DATE:
TITLE: GLOBAL TECHNICAL STANDARDS
© 2013 Weatherford International, Inc.
This document is copyrighted and, whether patentable or non-patentable subject matter, embodies the proprietary and confidential information of
Weatherford. Recipients agree it is loaned in confidence with the understanding that neither it nor the information in it will be reproduced, used or disclosed
in whole or in part for any purpose except the limited purpose for which it is loaned. This document shall be returned to Weatherford upon demand.
1. Basic Safety Certification
2. Proficiency with Weatherford’s QMS
3. Fluent in English
4.8. Personnel Training
In accordance with Weatherford’s QMS, Weatherford shall identify and document all training needs
and provide training for all Weatherford’s CT personnel to ensure they meet pre-established
qualification requirements.
The training requirements shall include the following.
1. Basic Safety Certification
2. Specific Safety Certification, as required for the position
3. Safety, health, and environment (SH&E)
4. Well control procedures and operations
5. Quality systems indoctrination and familiarization
6. Unique job skills/requirements training
4.9. Personnel Documentation
Weatherford shall maintain documentation demonstrating that Weatherford’s personnel are
properly trained and qualified for the following activities.
1. Performing required duties
2. Safely handling all fluids planned for the job
3. Operating any safety equipment required for the job
5. CT SERVICE CATEGORIES
This section defines service categories for Weatherford’s CT operations. In these standards,
normal circulation is flow down the CT string and return flow up the annulus around the CT.
5.1. Pressure Definitions
This section defines pressures used to determine requirements for PCE and surface piping.
5.1.1. Maximum Anticipated Surface Pressure (MASP)
Maximum anticipated surface pressure (MASP) at the wellhead is the maximum pressure available
to the wellbore from exposed formation(s) minus the lesser of the following.
1. The hydrostatic head of producible reservoir fluid(s), or
2. The hydrostatic head of fluid(s) pumped through the CT
If the producible reservoir fluid is unknown, then use a methane gas gradient (0.1 psi/ft or 2.26
kPa/m).
Apply for this Job
Join Our Talent Network
Share:
©2015 Weatherford
SiteMap
Locations
Careers
Terms of Use
Privacy Policy
|
